Run Your Car on Water and save $thousands.
News on cars running on water gains much excitement and hope recently. The term “Water Car”, “HHO Car”, Water for Gas and similar are becoming familiar with claims of up to 60% or more saving on gas are achievable by simply adding water. If these claims are real, motorists could expect extra several hundreds to thousands of dollars cash in their pockets. Advertisements on do-it-yourself manuals and kits costing less than $100 dollars are found everywhere. Let’s investigate the matter to see whether “Running your car on water” is possible right now?, not in a decade or two, and at what cost?.
Water car, HHO car, etc. are simply cars equipped with special devices that turn water into HHO gas, sometimes called Brown’s Gas or Hydroxy. The gas does not actually drive the vehicle, but dramatically increase combustion efficiency. HHO gas is produced by an electrolyzer and is then introduced to the combustion chamber through the intake manifold.
In normal situation, without this HHO gas, combustion is usually poor due to the oversized fuel droplets in the mixture. The efficiency of normal internal combustion engine is very poor and around 75-80% of gasoline converts to pollution and carbon deposit(unburned fuel), heat, vibration and noise- instead of desired motion.
With HHO gas introduced into the chamber, the oversized fuel droplets are splitted or cut into smaller ones by the very tiny Hydrogen, which also attach itself to the finer droplets. The resulting very fine hydrogen-enhanced mixture is burned much more thoroughly. This more complete combustion results in lowered emission and improved mileage. HHO gas is said to be about 3 times more potent than gasoline of equal weight.
Do-It-Yourself conversion manuals are available online for around $50 to $100. The major vendors are Water4Gas.com, RunYourCarwithWater.com, Burn-Water.net and DriveWater.com. Though the manuals do not include parts needed for the system, they usually show you how to make or where to buy the required parts. These parts are normally available quite cheaply at your local hardware store and total cost should be less than $200. You can assemble the system yourself by following the detailed blueprint from the manual which may take you one afternoon during weekend. If you choose to get your mechanic do it for you, it should take him less than an hour. Either way, you can now look forward to smoother ride and great savings on gas!
Written by Car Enthusiast on May 15th, 2008 with
no comments.
Read more articles on Automotive.
- [+] Digg: Feature this article
- [+] Del.icio.us: Bookmark this article
- [+] Furl: Bookmark this article
