SCBA Mask Cleaning

SCBA respirator masks are an important safety device employed in the workplace today. They are used by anyone from fire departments to hazardous industrial applications. Basically, anywhere a person needs a self-contained source of fresh breathable air. SCBA stands for Self Contained Breathing Apparatus and they are used in environments where the air is not suitable to breath and cannot be filtered such as particulate matter like paint spray. The SCBA masks provides the wearer a self contained environment with fresh air delivered to the respirator mask from an air tank. However, one overlooked maintenance item is SCBA mask cleaning. This safety gear is often worn by different people and can become quire dirty and unsanitary. Bacteria, bodily fluids, soot and toxic substances all build up and contaminate your respirator equipment. Cleaning is an extremely important task that must be completed in order to maintain safe equipment.

Cleaning your SCBA mask and gear is a relatively simple process and can prolong the life of your respirator mask. SCBA masks are generally used in dirty environments that filled with dirt and other contaminants. Your first step is to clean the dirt and grime that has accumulated on the mask, hoses and tank. First remove the filters, cartridges or tanks. Now take apart the respirator mask by removing diaphragms and air hoses. (Remember to inspect and replace any broken or defective parts.) Wash all the parts in warm water with a mild soap or detergent and scrub away any dirt or contaminants that may have collected on the respirator gear. Then rinse with running water.

The next step is to clean the SCBA gear with a disinfecting agent. There are different methods for this. The first and probably easiest is to just use a bleach solution. Just mix 1 milliliter of bleach to 1 liter of water. Iodine also is effective using approximately the same proportions. There are also commercially available cleaners available for sale as well. (It is recommended that you check to see if the manufacturer approves of their use on your particular SCBA mask.) Once the solution is mixed correctly, the equipment needs to be placed in it. Immersion is the best way to sure that all of the SCBA gear is disinfected. Simply submerge the equipment for at least 2 minutes in the disinfecting agent you are using and then rinse thoroughly in running water. Rinsing is very important after this process because the disinfecting agent can cause skin irritation if it is not completely removed from the SCBA mask and equipment. After being thoroughly rinsed, dry all the components and reassemble. Now check and make sure all components are functioning properly and safely.

Ultrasonic cleaning is another method commonly used for cleaning disinfecting SCBA respirator masks and equipment. Ultrasonic cleaning has been around for decades and is used in applications ranging from biomedical to jewelry cleaning. Ultrasonic energy is applied to a cleaning solution causing cavitation. Small bubbles form and implode during this process. This creates a vigorous scrubbing action that cleans the SCBA gear. This process cleans far more effectively than just hand scrubbing with a bleach or iodine solution.

After using either one of the previous methods for disinfecting, the SCBA mask and gear are ready for the next person to use in a hazardous situation. Your workers can safely wear the SCBA mask and equipment free from pathogens and other toxic contaminants. After all, the whole point of wearing an SCBA respirator mask is deliver clean air to the wearer and by not properly cleaning your respirator masks your workers safety is being compromised.

Jason has been in the construction equipment and industrial sales business for over 10 years. He owns and operates Red Hill Supply to better serve the automotive and industrial industries. - Air Compressors

Written by Car Enthusiast on December 23rd, 2007 with no comments.
Read more articles on Automotive.

Related articles

No comments

There are still no comments on this article.

Leave your comment...

If you want to leave your comment on this article, simply fill out the next form:

You have to be identified to write a comment.

Tips In Choosing The Appropriate Car Or Limo Service You Need

With the various limousine services in Toronto, one might get a headache on which to call and avail services from. There might not only be hundreds of limousine services in Toronto so it is more advisable to be wise and prepared in choosing the appropriate limo ride for your needs. Here are some tips that you should remember in deciding what limo service you must avail:

1. Do some background checking or ask friends if they have availed services from your preferred Toronto car service company.

This is a wise action to make before getting services; it is a-must to orient yourselves before getting service. There are a huge variety of car services available within Toronto but only a few are reliable. So, better prevent yourselves from being deceived by those crappy limousine services that will only get into your nerves because of poor service.

2. Ask for free estimates or price consultation.

In some aspects, hiring a car service like an airport limousine service in Toronto might sometimes cost you more than the usual. That’s why in cases such as this it is recommendable to ask for free estimates or price consultation so that you will have the chance to prepare a budget which best fits the kind of limo or car service for you needs. Many Toronto limousine rentals actually provide offers such as this so better call up those kind of car services.

3. Protect your interest.

When getting a Toronto airport limo service, for example, be advised that it is your needs that is what’s important. Do not let yourselves be manipulated on the kind and the type of car or limo ride you need. You are the person who best know what you need so state everything you need from the start and communicate very well with the car or limo service company you are about to avail. There are too many risk that might come and no one for sure wants to experience the hassles of traveling.

4. Comfort and Security at all times.

Two main reasons why many individuals prefer to get a private car or limo service when touring or traveling in different places are comfort and security. Especially if one is traveling along with family or business colleagues, it is more of a guarantee that he or she is traveling with comfort and safety. And to be able to ensure to get comfort and security, finding a reliable and credible company providing services like airport limousine service in Toronto is the key to get hold of one. And lastly:

5. Make sure the company is legal.

One good way in checking if a car service company is legal or not is through inquiring in a transportation office. Through a quick call or surf in the internet can be used as tools in checking if it’s legal or not. Just make sure to provide the correct information about the car service company you are about to get. Also, ask if they are bonded just to serve as your service protection from them.

These tips stated above are only a few from the long list on how to get or select the appropriate and reliable car service company you need to avail. Making sure only takes a little of your time so better do them before getting one. These tips will serve as you shield against deceitful companies that might take advantage of you. Remember, it is better to be safe than to gain bad consequences in return.

Andrew Beene is a web associated with a company providing Toronto car service.

Written by Car Enthusiast on August 21st, 2008 with comments disabled.
Read more articles on Automotive.

Related articles

Comments disabled

Comments on this article have been disabled.